Cut Quantities
Cut volumes developed from provided existing and proposed grading information.
Sitework
Earthwork Estimating Services
Cut, fill, and grading quantity support from the contours and grading data you provide—organized for earthwork packages without inventing field surveys.
Overview
Earthwork Quantities From Project Grading Data
Earthwork estimating depends on the grading information in the project set. Contours, spot grades, and sections drive cut and fill logic more than a simple site outline.
Borrow, export, and shrinkage assumptions only belong in the package when the documents or your requested methods define them. Otherwise those items are listed as open decisions.
This service does not claim to replace survey crews or invent existing grades that are missing from the files you share. Quantities stay inside the project data provided.
Trade focus
Earthwork quantity support for grading packages.
What We Estimate
Depending on project drawings and requested deliverables.
Fill Quantities
Fill volumes organized from proposed grades and documented fill zones.
Grading Areas
Disturbed or graded areas identified on grading plans.
Import / Export Notes
Borrow or export summaries only when methods or balances are defined.
Subgrade Prep Items
Subgrade and related prep quantities when shown with earthwork scope.
Mass Haul Organization
Optional zone or phase organization when requested for larger sites.
Typical Quantity Categories
Cut volumes from provided data
Fill volumes from provided data
Grading area summaries
Topsoil strip/respread when shown
Import/export notes when defined
Who Uses This Service
Benefits of Document-Based Earthwork Takeoffs
Contour-driven logic
Volumes follow grading documents rather than rough site guesses.
Balance transparency
Import/export needs are only stated when data supports them.
Phase readiness
Zone breakdowns help teams review large sites in pieces.
Honest data limits
Missing existing grades are flagged instead of fabricated.
Earthwork Estimating Process
01
Collect grading data
Gather existing/proposed contours, sections, and civil notes.
02
Confirm calculation basis
Align on grid, section, or software method appropriate to the documents.
03
Develop cut/fill
Calculate volumes from the provided grading information.
04
Organize by zone
Break results into areas or phases when requested.
05
Note shrinkage/swell
Apply factors only when specified or requested as a stated method.
06
Flag missing survey data
Document gaps that prevent reliable existing-to-proposed comparison.
07
Deliver earthwork package
Issue cut/fill summaries with assumptions clearly listed.
Possible Earthwork Deliverables
Depending on project drawings and requested deliverables.
Cut and fill quantity summary
Zone or phase breakdown
Grading area listing
Import/export notes when defined
Assumptions and data limitation notes
Related Services
Related estimating services
Connect this trade with cost estimating, takeoffs, bid support, and cost analysis.
Quantity Takeoffs
Precise quantity measurement for materials and labor where applicable.
View serviceConstruction Cost Estimating
Accurate residential, commercial, industrial, and public project cost estimates.
View serviceCost Analysis
Clear cost analysis to support informed construction decisions.
View serviceBid Support
Estimate organization and bid preparation support for GCs and subcontractors.
View service
Related Trades
Related trade estimating
Explore connected trades that often appear on the same drawings.
Related Pages
Relevant audiences & project types
See how estimating support aligns with other audiences and project types.
FAQ
Questions about this trade
Answers specific to this trade estimating page — without unsupported guarantees.
Do you survey the site?
No. Earthwork quantities are developed from the drawings and project data you provide. We do not claim independent site measurements without that information.
What if existing contours are missing?
Missing existing-grade information is documented as a limitation. Reliable cut/fill comparison needs both existing and proposed data.
Can you include topsoil stripping?
Yes, when shown on the documents and requested as part of the earthwork scope.
Are shrink and swell factors included?
Only when specified or when you request a stated method for those factors.
Can earthwork be separated from utilities?
Yes. Earthwork and utility trench excavation can be organized separately when requested.
Do you provide machine control models?
This service focuses on estimating quantities, not machine control modeling, unless defined as a separate scope.